Locations

Carthage, Tennessee Plant

• 361,000 square feet (8.2 acres)
• Cast house - 6”, 7”, 8”, 10” diameter billet
• Extrusion presses (5) - 1,650 - 5,500 ton rating
• Wet paint
  • 24’ 2” maximum length vertical electrostatic meets or exceeds AAMA specifications - polyester & high performance
• Anodizing
  • 35’ maximum length anodize and hardcoat
  • anodize film thickness - .15 - .80 mils
  • architectural hardcoat film thickness - .70 - 1.20 mils
  • automated process controls
• Thermal barrier
  • fill & debridge, thermal bar
• Fabrication
• ISO 9001 : 2008 Registered 130 KB
• ISO 14001 : 2004 Registered 130 KB

Kentland, Indiana Plant

• 208,000 square feet (4.8 acres)
• Extrusion presses (3) - 1,650–2,000 ton rating
• Wet paint
  • 24’1” maximum length vertical electrostatic
  • polyester meets or exceeds AAMA specifications
• Anodizing
  • 26’2” maximum length anodize and hardcoat
  • anodize film thickness - .20–.80 mils
  • architectural hardcoat film thickness - .70–1.20 mils
• Thermal barrier
  • fill & debridge
• ISO 9001 : 2000 Registered 218 KB

Newnan, Georgia Plant

• 523,000 square feet (12.4 acres)
• Cast house - 6", 7", 8", 9" diameter billet
• Extrusion presses (5) - 1,550–2,750 ton rating
• Wet paint
  • 24' maximum length vertical electrostatic
  • meets or exceeds AAMA specifications
• Anodizing
  • 26' maximum length anodize and hardcoat
  • 24' maximum length for Brite Dip
  • anodize film thickness - .15–.80 mils
  • architectural hardcoat film thickness - .70–1.20 mils
• Buffing
  • 24' maximum length
  • 6' minimum length
• Fabrication
• ISO 9001 : 2000 Registered 98 KB